Menu Close
50 lb Can of Lincoln Electric Stick Electrodes

Diameters / Packaging

Diameters
 50 lb Easy Open Can
1/8 x 14 in (3.2 x 350 mm) ED012885
3/16 x 14 in (4.8 x 350 mm) ED012889
3/32 x 12 in (2.4 x 300 mm) ED012893
5/32 x 14 in (4.0 x 350 mm) ED012896

Shield-Arc® 85

Stick (SMAW)

CLASSIFICATIONS:
AWS A5.5 : E7010-A1

Low Alloy, Cellulosic, Pipe • AWS E7010-A1

Diameter

Select Diameter

  • 1/8 x 14 in (3.2 x 350 mm)
  • 3/16 x 14 in (4.8 x 350 mm)
  • 3/32 x 12 in (2.4 x 300 mm)
  • 5/32 x 14 in (4.0 x 350 mm)

Package

Select Package

  • 50 lb Easy Open Can
Buy Now

DETAILS

Features

  • For welding 0.50% molybdenum steel
  • Deep penetration and superior puddle control
  • Light slag for minimal arc interference
  • Clean, visible weld puddle

Typical Applications

  • API 5L X42 through X56 grade pipe
  • Cross country and in-plant pipe

Welding Positions

  • All

Shielding Gas

  • Not Applicable

Special Features

  • Designed for downhill welding on pipe

Disclaimers

Warning -

Cancer and Reproductive Harm -

www.P65Warnings.ca.gov

Service Information

Documentation

You May Also Need

50 lb Can of Lincoln Electric Stick Electrodes

Shield-Arc® 85

ED012889
50 lb Can of Lincoln Electric Stick Electrodes

Shield-Arc® 85

ED012893
50 lb Can of Lincoln Electric Stick Electrodes

Shield-Arc® 85

ED012896
50 lb Can of Lincoln Electric Stick Electrodes

Excalibur® 7018-A1 MR® Stick (SMAW) Electrode

ED032875
View All

BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS Search page

See test result disclaimer

CONFORMANCE

CONFORMANCES SPECIFICATION CLASSIFICATION
AWS AWS A5.5 E7010-A1
ISO ISO 2560-B E4910-G P
ABS AWS A5.5 E7010-A1
CWB CSA W48 E4910-A1

MECHANICAL PROPERTIES

Classification Yield Strength @ 0.2% Offset
MPa (ksi) 		Tensile Strength
MPa (ksi) 		Elongation
% 		Hardness Rockwell B
E7010-A1 Requirement 390 (57) min. 480 (70) min. 22 min.
Typical Result, 1 hour @ 620°C (1150°F) 440-520 (64-75) 530-630 (77-91) 22-28 84-93

DEPOSIT COMPOSITION

Classification %C %Mn %Mo %P %S %Si
E7010-A1 Requirement 0.12 max. 0.60 max. 0.40 - 0.65 0.03 max. 0.03 max. 0.40 max.
Typical Result 0.07-0.12 0.40-0.58 0.53-0.57 0.01 max. 0.01 max. 0.13-0.26

TYPICAL OPERATING PROCEDURES

Diameter Polarity Current
Amps
3/32 in (2.4 mm) DC+ 50-90
1/8 in (3.2 mm) DC+ 75-130
5/32 in (4.0 mm) DC+ 90-175
3/16 in (4.8 mm) DC+ 140-225